8 Tyre Hazards That Could Put You at Risk

Your vehicle is a machine having a lot of components. Among these components, only tyres make direct contact with the road. Other parts may play their role in the mechanism of your car, but they cannot move it on the roads. Tyres move. Your vehicle is not a vehicle if it does not have tyres. Without tyres, we will call it a large iron box with an engine and some other parts.

Cheap Tyres Warrington are important, but not all drivers give them the attention they deserve. Tyres have to encounter unfavorable driving conditions. Therefore, they experience a lot of issues, such as cracks, bulges, and low tread depth.

In this blog, we will highlight 8 issues that may impact your safety, handling, and fuel efficiency. Moreover, these issues would spoil your plan to get good results after MOT.

Have a glance!


1.Black Ice: The Invisible Danger

Black ice is a thin, almost invisible layer of ice that forms on cold roads, especially during early mornings or shaded spots. As this layer is almost invisible, noticing this is not easy for drivers. The nature of black ice makes it dangerous. You would not even notice it when your car starts sliding. Even tyres with good tread can lose grip on black ice.

Driving slowly in cold conditions is a good policy in icy weather conditions to avoid black ice. Moreover, avoid sudden braking and sharp turns to make things easier to handle. Install winter or all-season tyres in your vehicle to ensure proper grip on snowy roads.

2. Tyre Underinflation and Overinflation

Driving with too little or too much air in your tyres is highly risky. Experts do not recommend driving with the wrong air pressure. Every set of tyres comes with recommended air pressure, and you have to maintain it to ensure comfort, safety, and performance. If you do not maintain correct air pressure, your tyres may experience uneven tread wear, poor handling, lower fuel efficiency, and tyre blowouts.

So, check your tyres regularly for air pressure with a tyre pressure gauge. Always check your tyres when they are cold for accurate readings.

3. Tyre Tread Depth and Legal Limits

The tread is the patterned surface of tyres that helps them grip the road. This outermost layer of tyres is responsible for scattering water in wet conditions as well. tyres come with optimum tread depth, but gradually they lose it due to certain reasons.

In the UK, laws require you to maintain a minimum legal tread depth of 1.6mm. If your tyres go below this limit, they will become illegal on UK roads. Moreover, driving with bald tyres is risky, as mentioned above.

You have to check your tyres for tread depth at regular intervals. You can measure the tread depth with a 20 p coin as a simple trick. Moreover, you can use a tread depth gauge for precise results.

As another consideration, you may fail your MOT due to bald tyres.

4. Tyre Ageing and Rubber Cracking

Your tyres age even if you do not use them regularly. Stored tyres age as well. Over time, tyre rubber hardens and shows cracks in the sidewall.

Cracks in tyres are highly risky. This issue may lead to sudden failure when driving at high speed. Moreover, hard rubber is not able to grip the road effectively.

According to recommendations of experts, you should change your tyres after 6 to 10 years. Do not buy your tyres if they are more than 6 years old.

Ageing tyres make some warning signs like cracking, dry rubber, and tread wear. Check old tyres for these signs and replace them as soon as possible.

5. Sidewall Damage: Cuts, Bulges, and Cracks

Damage in the sidewall is risky this area is vital for the strength of car tyres. The sidewall generally shows bulges when your tyre hits a pothole or any hard object. The presence of bulges on the sidewall is an indication of internal injury.

Cracks on the sidewall show the bad condition of tyre rubber. Cracks occur when rubber is hard and brittle, and it is losing its strength gradually.

Deep cuts and punctures are also not favorable for your tyres.

Change your tyres when you observe these signs. Bulges, cracks, cuts, and sidewall punctures are not repairable. So, changing existing tyres is the only option you have.

6. Uneven Tyre Wear

When one side of the tyre wears faster than the other, this condition is called uneven tread wear. In this issue, you can observe patchy spots in the tyre as well.

Uneven tread wear occurs in tyres due to poor wheel alignment, wrong air pressure, and suspension issues.

Uneven tread wear is certainly risky because of poor grip, affected steering, and blowouts.

7. Bead Seating Issues

In this issue, the tyre bead is not properly seated against the wheel rim. Proper attachment of tyre bead to the rim is essential for air pressure. Air leaks slowly due to this problem. In severe cases, tyre detachment is also possible.

You can detect this issue with these signals:

Constant pressure loss.

A slow hissing sound near the rim.

You will observe air bubbles if you spray soapy water.

This issue is not your cup of tea. See a mechanic and let him fix it.

8. Tyre Valve Stem Damage

A small rubber or metal valve is used to fill tyres with air. This valve may develop faults like leaking or cracks, leading to air loss, reduced grip, and increased wear.

Change your valve stem whenever you change your tyres to avoid this issue. Change the valve if the cap is missing or the stem looks worn. Change it if you notice a slow air leak without a sign of puncture.

Final Thoughts:

Your car’s Cheap Tyres Warrington work quietly to keep you safe. They bear unfavorable driving conditions. Therefore, you have to maintain them properly and keep them safe for a long time. Over time, tyres become sick due to a lot of issues. You can preserve your tyres and keep them free from these issues if you apply some maintenance and safety tips. Moreover, you have to leave the habits, such as overloading and over-speeding.

Our Website:- Bullet Car Repairs Ltd

Address:- 1 Lilford Street, (Unit 7), Warrington Cheshire, WA5 0LS, UK

Comments

Post a Comment

Popular posts from this blog

How To Get Ready Your Car For The MOT?

Image
  MOT is a crucial test that gives immense checks for a better understanding of ensuring the changes in the vehicle. If all these things work out properly it will give a better check of the heap. It is an authorized test that gives emission checks within the overall understanding of the car. It gives emission of check of the components that enhance the car operations. It is majorly a problem to manage the right component of the car within managing understanding. You need to ensure that the screenwash of the car will be working properly to have a better understanding. It ensures the vehicle's right check of the safety purpose to handle it precisely within managing the options. It is important to have a better understanding effectively to get the right things to be done properly. These have measures to give additional changes to improve the frequent aspects within giving the different performances of the car. It is important to identify and address the potential safety hazards to mai...
Read more

Driving Safely in Winter: Tips for Better Visibility and Traction

Image
  Winter driving can be more challenging than summer driving. In essence, in the winter, the hazards you face often boil down to two categories: visibility problems and traction. Fully understand these risks and how they are dealt with to enable you to drive safely through the winter months with  Cheap Tyres Warrington.   Challenges in Visibility during the Winter   During winter, it tends to be difficult to see around them when driving. There are some common weather conditions that cover visibility challenges:   Fog: Sometimes fog can roll in all of a sudden and you just can't be able to see the other road users, signs, or the road itself.   Rain: Wet conditions from rain will cause your windshield to wipe over and obscure your vision. Snow: White stuff will blanket important road signs and other visual cues. Low Light: What else defines winter but shorter days that bring more nighttime driving?    Ways to Improve Visibility   One may take c...
Read more

Why Do Cars Fail The MOT Test?

Image
  Drivers in the UK have to bring their cars for an inspection every year. This is a compulsory inspection mandated by the government and is in place to ensure the roadworthiness of the cars and whether they are fit for driving or not, from both a safety and environmental perspective. Thus, one has to go for an MOT every year, as long as the car is three years old or more.  During this inspection, millions of cars are checked and at an average 20 to 25% of them fail the test. This happens because the inspection brings to light at least something wrong with the car. Although you can pass the MOT with a few Minor faults, Major or Dangerous faults will result in a direct failure. If you want to learn more about the MOT and why cars fail this test, read about it in the blog we have put together.  Can You Prevent An MOT Failure? Let’s tackle the big question first, is it possible to prevent an MOT failure? The answer is, yes, it is not only possible but also quite easy. All yo...
Read more